NMOS Media Types
This Media Types parameter register contains values that may be used to identify the media type, used in the media_type property of the flow resource or the media_types property of the receiver resource defined in the AMWA IS-04 NMOS Discovery and Registration Specification.
Relationship to AMWA IS-04
AMWA IS-04 defines media_type values in its Flow and Receiver JSON Schemas. These include IANA-registered media types used for RTP transport, such as video/raw, video/jxsv, and audio/L24, as specified by the relevant RTP payload format documents and the SMPTE ST 2110 suite.
This parameter register is supplementary to those IS-04 definitions. It lists only additional media types that are valid for use in NMOS but are not enumerated in the IS-04 schemas, for example, media types used with MXL as specified in AMWA BCP-007-03.
When validating or constraining media_type, implementers MUST consult the applicable IS-04 schemas (such as flow_video_raw.json and flow_video_coded.json) in addition to the entries in this register.
Criteria
- Each entry defines a unique media type name.
- Each entry has a short description.
- Each entry lists applicable specifications.
- Additions and updates to this parameter register are to be submitted via a Pull Request (PR) according to the General Procedures and Criteria.
Values
Note: A JSON schema supporting validation of the media types defined in this register is available as media_type_register.json. It does not enumerate IANA or other media types already defined in IS-04. The schema MAY be used in addition to the Flow and Receiver schemas found in the AMWA IS-04 specification.
Video v210
- Name:
video/v210 - Description: Identifies an uncompressed buffer carrying 10 bit 4:2:2 video without transparency
- Applicability: AMWA IS-04 since v1.3, AMWA BCP-007-03 since v1.0
Video v210a
- Name:
video/v210a - Description: Identifies an uncompressed buffer carrying 10 bit 4:2:2 video with transparency (key and fill signals)
- Applicability: AMWA IS-04 since v1.3, AMWA BCP-007-03 since v1.0
Audio float32
- Name:
audio/float32 - Description: Identifies audio stored as 32 bit float values with a full-scale range of −1.0 to +1.0
- Applicability: AMWA IS-04 since v1.3, AMWA BCP-007-03 since v1.0
Ancillary data
- Name:
video/smpte291 - Description: Identifies an ancillary data payload based on RFC 8331
- Applicability: AMWA IS-04 since v1.0, AMWA BCP-007-03 since v1.0