NodeAPI
This API definition uses RAML 0.8, which is not supported by the shared HTML renderer. The source is shown below.
#%RAML 0.8
# AMWA NMOS Discovery and Registration Specification: Node API
# (c) AMWA 2016
title: Node
baseUri: http://example.api.com/x-nmos/node/{version}
version: v1.0
mediaType: application/json
schemas:
- Node: !include schemas/node.json
Nodes: !include schemas/nodes.json
Device: !include schemas/device.json
Devices: !include schemas/devices.json
Source: !include schemas/source.json
Sources: !include schemas/sources.json
Flow: !include schemas/flow.json
Flows: !include schemas/flows.json
Sender: !include schemas/sender.json
Senders: !include schemas/senders.json
SenderTarget: !include schemas/sender-target.json
Receiver: !include schemas/receiver.json
Receivers: !include schemas/receivers.json
EmptySchema: !include schemas/empty.json
ErrorSchema: !include schemas/error.json
documentation:
- title: Overview
content: |
The Node API is exposed by each NMOS Node in a system, regardless of whether it is possible for that Node to provide NMOS resources such as Flows, Sources etc. Data exposed by the Node API is used to populate the (distributed) registry via the Registration API. In smaller deployments the Node API is fetched from directly as required by Nodes which implement the Peer to Peer specification.
- title: mDNS Advertisement
content: |
Node APIs MUST produce an mDNS advertisement of the type \_nmos-node.\_tcp
The IP address and port of the Node API MUST be identified via the mDNS advertisement, with the HTTP path then being resolved via the standard NMOS API path documentation.
When a Node is unable to locate or successfully register with a Registration API it MUST additionally advertise the following mDNS TXT records as part of its Node advertisement. If a Node is successfully registered with a Registration API it MUST withdraw advertisements of these TXT records.
| **TXT Record Name** | **Corresponding Node API Resource** |
|---------------------|-------------------------------------|
| ver\_slf | self |
| ver\_src | sources |
| ver\_flw | flows |
| ver\_dvc | devices |
| ver\_snd | senders |
| ver\_rcv | receivers |
The value of each of the above should be an unsigned 8-bit integer initialised to '0'. This integer MUST be incremented and mDNS TXT record updated whenever a change is made to the corresponding HTTP API resource on the Node. The integer must wrap back to a value of '0' after reaching a maximum value of '255' (MAX_UINT8_T).
For example, the 'ver_src' TXT record must be created when the Node first advertises itself via mDNS. If the data held within the HTTP resource for /sources is added to, removed from or edited, then the 'ver_src' text record must be modified (value incremented).
- title: Receiver Subscriptions
content: |
A PUT request to /receivers/{receiverId}/target will modify which Sender a Receiver is subscribed to.
In order to 'subscribe' a Receiver to a Sender, a PUT request should be made to this resource containing a full Sender object.
In order to 'unsubscribe' a Receiver from a Sender, an empty object '{}' should be used in this PUT request.
In both cases the target resource should respond with a 202 code (accepted) on success, and a response body matching the request body.
The Receiver's subscription object contains a 'sender_id' attribute which must be updated once a Receiver has successfully requested, parsed and actioned a change to the manifest_href is it connected to.
/:
displayName: Base
get:
description: List of paths available from this API
body:
schema: EmptySchema
responses:
200:
body:
example: !include ../examples/nodeapi-v1.0-base-get-200.json
schema: !include schemas/nodeapi-base.json
/self:
displayName: Self
get:
description: Get information about this Node
body:
schema: EmptySchema
responses:
200:
body:
example: !include ../examples/nodeapi-v1.0-self-get-200.json
schema: Node
/sources:
displayName: Sources
get:
description: List Sources
body:
schema: EmptySchema
responses:
200:
body:
example: !include ../examples/nodeapi-v1.0-sources-get-200.json
schema: Sources
/{sourceId}:
uriParameters:
sourceId:
type: string
pattern: "^[0-9a-f]{8}-[0-9a-f]{4}-[1-5][0-9a-f]{3}-[89ab][0-9a-f]{3}-[0-9a-f]{12}$"
get:
description: Get a single Source
body:
schema: EmptySchema
responses:
200:
body:
example: !include ../examples/nodeapi-v1.0-sourceid-get-200.json
schema: Source
404:
description: Returned when the requested Source ID does not exist
body:
schema: ErrorSchema
/flows:
displayName: Flows
get:
description: List Flows
body:
schema: EmptySchema
responses:
200:
body:
example: !include ../examples/nodeapi-v1.0-flows-get-200.json
schema: Flows
/{flowId}:
uriParameters:
flowId:
type: string
pattern: "^[0-9a-f]{8}-[0-9a-f]{4}-[1-5][0-9a-f]{3}-[89ab][0-9a-f]{3}-[0-9a-f]{12}$"
get:
description: Get a single Flow
body:
schema: EmptySchema
responses:
200:
body:
example: !include ../examples/nodeapi-v1.0-flowid-get-200.json
schema: Flow
404:
description: Returned when the requested Flow ID does not exist
body:
schema: ErrorSchema
/devices:
displayName: Devices
get:
description: List Devices
body:
schema: EmptySchema
responses:
200:
body:
example: !include ../examples/nodeapi-v1.0-devices-get-200.json
schema: Devices
/{deviceId}:
uriParameters:
deviceId:
type: string
pattern: "^[0-9a-f]{8}-[0-9a-f]{4}-[1-5][0-9a-f]{3}-[89ab][0-9a-f]{3}-[0-9a-f]{12}$"
get:
description: Get a single Device
body:
schema: EmptySchema
responses:
200:
body:
example: !include ../examples/nodeapi-v1.0-deviceid-get-200.json
schema: Device
404:
description: Returned when the requested Device ID does not exist
body:
schema: ErrorSchema
/senders:
displayName: Senders
get:
description: List Senders
body:
schema: EmptySchema
responses:
200:
body:
example: !include ../examples/nodeapi-v1.0-senders-get-200.json
schema: Senders
/{senderId}:
uriParameters:
senderId:
type: string
pattern: "^[0-9a-f]{8}-[0-9a-f]{4}-[1-5][0-9a-f]{3}-[89ab][0-9a-f]{3}-[0-9a-f]{12}$"
get:
description: Get a single Sender
body:
schema: EmptySchema
responses:
200:
body:
example: !include ../examples/nodeapi-v1.0-senderid-get-200.json
schema: Sender
404:
description: Returned when the requested Sender ID does not exist
body:
schema: ErrorSchema
/receivers:
displayName: Receivers
get:
description: List Receivers
body:
schema: EmptySchema
responses:
200:
body:
example: !include ../examples/nodeapi-v1.0-receivers-get-200.json
schema: Receivers
/{receiverId}:
uriParameters:
receiverId:
type: string
pattern: "^[0-9a-f]{8}-[0-9a-f]{4}-[1-5][0-9a-f]{3}-[89ab][0-9a-f]{3}-[0-9a-f]{12}$"
get:
description: Get a single Receiver
body:
schema: EmptySchema
responses:
200:
body:
example: !include ../examples/nodeapi-v1.0-receiverid-get-200.json
schema: Receiver
404:
description: Returned when the requested Receiver ID does not exist
body:
schema: ErrorSchema
/target:
put:
description: Request a change to a Receiver's subscription
body:
example: !include ../examples/nodeapi-v1.0-receivertarget-put-request.json
schema: SenderTarget
responses:
202:
body:
example: !include ../examples/nodeapi-v1.0-receivertarget-put-200.json
schema: SenderTarget
400:
description: Returned when the PUT request is incorrectly formatted or missing mandatory attributes
body:
schema: ErrorSchema
404:
description: Returned when the requested Receiver ID does not exist
body:
schema: ErrorSchema